Drinking water treatment unit
 
Production line for beverage
 
Filling machine
 
Labeling machine
 
Packing machine
 
Injection molding machine
   
Blow molding machine
   
Plastic mold and product
   
Ozone generator
   
RO system for sea water
   
Direct drinking water system
   
Various spares
   
Pipe fittings Water meter /dispenser
   
 
 
INJECTION MOLDING MACHINE
 
OSK series
 
 
Features:
Hydraulic Part:Use imported control valves and pumps with famous brands. Control with twin-proportional valve in pressure and flow so as to enable the machine reach an optimum state.
Injection part:Double directive column support and twin-cylinder balanced injection. Line arranged hydraulic motor-preplastication device. A fine turning device for aiming at center of nozzle and a close type of single cylinder advanced forward device Screw made of high quality nitrogen alloy steel and barrel with nitrogen treatment. Alarm functions while over-high/over-low temperature taking place in melting barrel.
Mold Clamping part: Adopted an inclined line-five points curve toggle structure. Using mechanic regulation supports as supports of mobile mould panel for protecting pull rod and prolonging its life. Underside protective device of mold close is convenient for mold setting. Equipped with a low-pressure mold protective function with high sensitivity.
Electric Control Part: Use the imported computer special for injection machine. Display with both Chinese and English. Acceleratin response speed of control system and improving the operation accuracy of machine are resulted by separate treatment of CPU. An automatic function of mold regulation is acting.		 COMPONENTS OF OSK SERIES
System oil pump: YUKEN Japan
Flow / Proportional valve:YUKEN Japan
Hydraulic electromagnetism cross valve:YUKEN Japan
Seals ("Y" oil seal):Germany and Japan
Linear position transducer (3pcs):VISHAY France
Computer controller:TECHMATION SA6363-1500 Taiwan
AC contactor:Schneider France
System air switch:Fuji Japan
Control air switch:Schneider France
Stroke switch:National Japan
Limited switch:National Japan
Pre-plastization motor:Joint-venture ZHONGYI motor
Air ejection device:electrical and program reserved
Core pulling and inserting device:Total two sets, one set reserved
Mold adjustment system:Hydraulic drive, gear adjustment
 
Technical data of OSK series injection molding machine:
Item Name of item Unit OSK-108 OSK-128 OSK-158 OSK-178 OSK-208 OSK-248 OSK-268 OSK-318 OSK-388
      A B C A B C A B C A B C A B A B A B A B A B
Injection unit Screw Diameter mm 35 40 42 40 42 45 42 45 50 45 50 55 50 55 55 60 60 65 65 70 70 80
Screw L/D Ratio Ratio 21.9 19.2 18.3 22 21 19.6 21 19.6 17.6 21 18.9 17.1 21 19 22.9 21 21 19.3 22.6 21 21 18.3
Shot Volume cm3 144 188 207 213 235 270 235 270 333 302 372 451 524 634 641 763 904 1061 1128 1308 1404 1834
Shot Weight g 131 171 188 194 214 246 214 246 303 275 339 410 477 577 583 694 823 966 1026 1190 1278 1669
Injection Pressure Mpa 246 189 171 201 182 159 203 176 143 196 158 131 174 143 160 135 142 121 143 123 143 110
Screw Speed rpm 10-240 10-235 10-250 10-230 10-200 10-200 10-200 10-180 10-180
Clamping unit Mould Clamping Force Kn 1080   1280     1580     1780   2080 2480 2680 3180 3880
Opening Stroke mm   300     365     400     420   455 490 570 610 660
Space Between Tie-bars mm×mm 360×330 380×360 420×380 470×430 515×450 580×530 620×580 660×620 720×650
Max.Mould Thickness mm   400     450     450     480   500 550 610 660 720
Min.Mould Thickness mm   150     150     150     180   200 200 220 250 250
Ejector Stroke mm   115     115     130     130   145 145 165 165 185
Ejector Force Kn   45     45     53     53   61 61 61 80 80
Ejector Number N   5     5     5     5   5 9 9 9 13
Others Pump Pressure mpa   16     16     16     16   16 16 16 16 16
Pump Motor Power Kw   13     15     15     18.5   18.5 22 22 30 37
Heating Capacity Kw   6.5     8     8     9.5   12.4 16.6 16.6 20.6 20.6
Machine Dimensions (L×W×H) m×m×m 3.9×1.2×1.76 4.35×1.3×1.75 4.5×1.35×1.75 4.75×1.35×1.85 5.15×1.4×1.9 5.55×1.67×2.05 5.92×1.67×2.1 6.5×1.85×2.3 6.8×1.8×2.3
Machine Weight Ton   2.7     3.4     3.8     4.4   5.2 6.6 7.5 10 14
* Specfications will be changed when the machines improved without prior notice.