-

Mga Awtomatikong Pallet Wrapping Machine,Awtomatikong Palletizer Machine,Awtomatikong PE Film Shrinking Packing Machine,Awtomatikong self-adhesive labeling machine,Awtomatikong OPP Hot Melting Glue Labeling Machine,Awtomatikong Sleeve Labeling Machine,3~5Gallon na Bote na Awtomatikong Washing/Filling/Capping Machine,3~10L PET Bote Awtomatikong Washing/Filling/Capping Machine,Bottling Juice Awtomatikong Washing/Filling/Capping Machine,Bottling Carbonated Inumin Awtomatikong Washing/Filling/Capping Machine,Bottling Water Awtomatikong Washing/Filling/Capping Machine,Leachate ng Landfill Treatment System,Car Wastewater Recycle System,Domestic Sewage MBR Recycle System,Disenyo ng Pagsasama-sama ng Kagamitang Tubig sa Pag-tap

K Series Machine (Bagong mahusay na disenyo na may servo energy-saving)

A2.4

Dami:

Ang K series injection molding machine ay isang bagong modelo batay sa mga istatistika ng kasalukuyang karaniwang ginagamit na mga detalye at muling idisenyo na pagsasaayos. Ito ay mas angkop para sa mga karaniwang pangangailangan ng mga customer. Nilagyan din ito ng servo motor upang mabawasan ang pagkonsumo ng enerhiya sa pagpapatakbo. Ang makina ay mas environment friendly, matipid at matibay.

A2.4-页面介绍照片a.jpg

Teknikal na data:

			K110			K150			K180			K230			K270
			A	B	C	A	B	C	A	B	C	A	B	C	A	B	C
INJECTION UNIT	DIAMETER NG SCREW	mm	32	36	40	36	40	45	40	45	50	45	50	55	55	60	65
	SCREW L/D RATIO	L/D	22.5	20	18	22.2	20	17.8	22.5	20	18	24.4	22	20.0	21.8	20	18.5
	VOLUME NG SHOT(TEORETIKAL)	cm3	145	183	226	204	251	318	283	358	442	398	491	594	713	848	995
	SHOT WEIGHT(PS)	g	132	167	206	185	229	289	257	326	402	362	447	541	649	772	906
	INJECTION PRESSURE	Mpa	239	189	153	215	175	138	223	176	143	230	186	154	211	178	151
	KAPASIDAD NG PAGPLASTIK	g/s	8	12	19	11	17	22	16	22	26	23	27	33	36	46	56
	BILIS NG SCREW	rp.m	0~220			0~195			0~190			0~200			0~220
CLAMPING UNIT	CLAMPING FORCE	KN	1100			1500			1800			2300			2700
	OPEN STROKE	mm	350			400			460			520			560
	SPACE BETWEEN TIE BARS(WxH)	mm	410×360			460×410			520×470			570×520			620×570
	KAPAL NG MOLD	mm	170~420			200~510			200~550			220~570			270~620
	PWERSA NG EJECTOR	KN	40			40			50			80			80
	EJECTOR STROKE	mm	110			130			130			150			150
IBA	KAPANGYARIHAN NG HEATER	kW	6.3			7.5			10			14			16
	PUMP MOTOR POWER	kW	13			16			20			24			30
	MAX. PRESSURE NG PUMP	Mpa	17.5			17.5			17.5			17.5			17.5
	DIMENSYON NG MACHINE(LxWxH)	m	4.6×1.2×1.9			4.8×1.2×1.9			5.2×1.3×2.1			5.8×1.4×2.2			6.0×1.5×2.3
	TIMBANG NG MACHINE	t	3.6			4			6			7			9
	KAPASIDAD NG OIL BOX	L	150			150			200			200			300

			K310			K360			K410			K460			K530
			A	B	C	A	B	C	A	B	C	A	B	C	A	B	C
INJECTION UNIT	DIAMETER NG SCREW	mm	60	65	70	65	70	75	70	75	80	75	80	85	80	85	90
	SCREW L/D RATIO	L/D	21.7	20	18.6	21.5	20	18.7	21.4	20	18.8	23.5	22	20.7	23.4	22	20.8
	VOLUME NG SHOT(TEORETIKAL)	cm3	919	1078	1251	1161	1347	1546	1443	1657	1885	1833	2086	2355	2187	2468	2767
	SHOT WEIGHT(PS)	g	836	981	1138	1057	1226	1407	1313	1506	1715	1668	1898	2143	1990	2246	2518
	INJECTION PRESSURE	Mpa	208	177	153	207	179	156	199	173	152	194	170	151	191	170	151
	KAPASIDAD NG PAGPLASTIK	g/s	42	51	60	49	58	72	46	57	64	54	60	71	59	70	89
	BILIS NG SCREW	rp.m	0~200			0~190			0~150			0~140			0~140
CLAMPING UNIT	CLAMPING FORCE	KN	3100			3600			4100			4600			5300
	OPEN STROKE	mm	610			680			760			810			850
	SPACE BETWEEN TIE BARS(WxH)	mm	670×620			720×670			770×720			820×770			870×820
	KAPAL NG MOLD	mm	270~670			270~720			280~800			300~830			320~870
	PWERSA NG EJECTOR	KN	90			90			120			120			120
	EJECTOR STROKE	mm	170			170			220			220			220
IBA	KAPANGYARIHAN NG HEATER	kW	20			23			28			31			40
	PUMP MOTOR POWER	kW	38			42			48			54			60
	MAX. PRESSURE NG PUMP	Mpa	17.5			17.5			17.5			17.5			17.5
	DIMENSYON NG MACHINE(LxWxH)	m	6.5×1.6×2.3			7.4×1.9×2.4			7.9×2.0×2.7			8.6×2.0×2.9			9.0×2.2×3.0
	TIMBANG NG MACHINE	t	10			13			15			18			22
	KAPASIDAD NG OIL BOX	L	400			400			500			600			700

			K600						K700					K800					K1000
			A	B	C	D	A	B		C	C	A	B		C	D	A	B		C	D
INJECTION UNIT	DIAMETER NG SCREW	mm	85	90	95	100	90	95		105	110	95	100		110	120	105	115		125	135
	SCREW L/D RATIO	L/D	23.3	22	20.8	19.8	23.2	22		19.9	19	23.2	22		20	18.3	24.1	22		20.2	18.7
	VOLUME NG SHOT(TEORETIKAL)	cm3	2554	2863	3190	3534	3022	3367		4113	4514	3544	3927		4752	5655	4979	5972		7056	8230
	SHOT WEIGHT(PS)	g	2324	2605	2903	3216	2750	3064		3743	4108	3225	3574		4324	5146	4531	5435		6421	7489
	INJECTION PRESSURE	Mpa	191	170	153	138	190	170		139	127	185	167		138	116	203	169		143	123
	KAPASIDAD NG PAGPLASTIK	g/s	73	93	100	115	79	85		110	123	76	88		110	132	97	124		147	185
	BILIS NG SCREW	rp.m	0~140				0~130					0~120					0~1115
CLAMPING UNIT	CLAMPING FORCE	KN	6000				7000					8000					10000
	OPEN STROKE	mm	900				960					1030					1130
	SPACE BETWEEN TIE BARS(WxH)	mm	920×870				970×920					1050×1000					1120×1120
	KAPAL NG MOLD	mm	400~920				400~970					400~1050					500~1120
	PWERSA NG EJECTOR	KN	160				160					190					190
	EJECTOR STROKE	mm	230				250					270					300
IBA	KAPANGYARIHAN NG HEATER	kW	43				47					50					63
	PUMP MOTOR POWER	kW	38+38				38+42					42+42					54+54
	MAX. PRESSURE NG PUMP	Mpa	17.5				17.5					17.5					17.5
	DIMENSYON NG MACHINE(LxWxH)	m	9.7×2.2×3.5				10.3×2.25×2.1					11×2.35×3.5					11.6×2.45×3.8
	TIMBANG NG MACHINE	t	27				33					38					50

Mayroon kaming higit pang mga modelo ng seryeng ito: K-1300, K-1500, K-1850, mga detalye ng detalye sa

sales@hautekmachinery.com

+86-13805862932

+86-18906621867

NINGBO HAUTEK MACHINERY CO., LTD.

粤ICP备12019139号粤公网安备44030502001115号

Sitemap